MCK pbxgateway Administrator's Manual page 105

Configuration
Assign a Name to the PBXgateway continued
Press the → key and type in a name for the PBXgateway.
2.
Note: The name must not exceed 16 characters.
Press the ← ← ← ← key to accept changes and go back to the Configuration
3.
Menu.
Press the ↓ ↓ ↓ ↓ key to the Save parameter.
4.
5. Press Enter to save changes to the active config (.rem or .swt) file.
Issue 2.1 December 1999
4-44