MCK pbxgateway Administrator's Manual page 157

The Management Interface (MI)
Method Parameter Location:
(Voice)
Configuration->Default->Port->
Description: Select voice compression method. Voice is
compressed to reduce bandwidth requirements.
Usage: Provides the system administrator with the ability to
change the compression method on a port-by-port basis.
Example: G.729A
Dependencies: Gateway only. The network must provide
adequate bandwidth.
See Also:
Chapter 4 Setting the Compression Method,
Chapter 6 Voice Quality Expectations
Appendix B Bandwidth Requirements
Mode
Parameter Location:
(WAN)
Configuration->WAN 1 or WAN 2
Description: Selects the WAN port connection type.
Usage: The WAN port of the PBXgateway connects the unit
to the network device (i.e. CSU/DSU). The mode or interface
type selects the protocol used by the unit.
RS-232, RS-530, and V.35 for Synchronous connections
Dependencies: The mode must match the interface type of
the network device.
See Also: Chapter 4 Setting the WAN Mode
Issue 2.1 December 1999
5-26