MCK pbxgateway Administrator's Manual page 91

Configuration
Set Port Description continued
Press the → → → → and ↓ ↓ ↓ ↓ key to the Description parameter.
2.
3. Type in the Description for the port.
Note: It is recommended that the Description parameter reflect the user
connected to the specific phone port.
Press the ← ← ← ← key to accept changes and go back to the Configuration
4.
Menu.
Press the ↓ ↓ ↓ ↓ key to the Save parameter.
5.
6. Press Enter to save changes to the active config (.swt) file.
Issue 2.1 December 1999
4-30