Troubleshooting
Port Status LEDs
Introduction
The PBXgateway and Branch Office units each have eight
or twelve LEDs indicating the status of the twelve user
phones (Branch unit) or PBX/KSU ports (PBXgateway).
IMPORTANT: Refer to page 6-19 for troubleshooting
the unit using the Port Status LEDs.
LED
Off
Meaning
Port is
disabled
Go to Table 6-6 "Enable the
Phone port" on the next page.
Table 6-5. Port Status LEDs
Solid
Slow
Green
Green
Flash
Port is
Extended,
enabled,
and user is
but not
on-hook
extended
(phone is
not in use).
Go to Table 6-7 "Port
Checks" on the next page.
Issue 2.1 December 1999
Fast
Green
Green
Flicker
Flash
Extended
Port is
and the
enabled,
user is
there is a
off-hook.
bad
(phone is
connection
in use)
to the PBX
or phones.
6-13