MCK pbxgateway Administrator's Manual page 221

File Management & System Upgrades
Using an FTP Connection continued
7. Upload the file to the EXTender by typing in the following command:
Example: Put C:\temp\v100.m6b
Put: Is the FTP command for "copy"
C: Is the PC Hard drive location of the file you are copying
temp: Is the folder containing the file
v100.m6b: Is the file being copied to the unit. The file will be saved under
this file name in Flash.
Note: The file will be copied using this filename. If a file already exists on
the EXTender with the same filename it will be overwritten.
8. Type Quit at the "ftp>" prompt to close the FTP program.
Issue 2.1 December 1999
7-11