Setting A Connect Password - MCK pbxgateway Administrator's Manual

Configuration

Setting a Connect Password

Introduction A connect password provides an authorized link between
the Remote unit and the PBXgateway. A Connect
Password restricts access to the phone port and is matched
to the User Id. Both must be entered for access.
Note: A Connect password is only required at the remote
site if the system administrator has set the password at the
PBXgateway.
Procedure
1. Access the Port Menu from the Main Menu using the following path:
Path:
->Configuration-> Port->Port 1 through 8
->Port 1
The following menu appears:
Figure 4.8. Default Menu
Press the → → → → key and ↓ ↓ ↓ ↓ key to access the Password parameter.
2.
Issue 2.1 December 1999
4-25