MCK pbxgateway Administrator's Manual page 111

Configuration
Setting the Administrator's Password continued
Procedure
1. Select Set Password from the Main Menu using the following path:
Path:
->Utilities->System->Set Password
You will be prompted to enter the Old Password.
Note: There is no default admin password.
2. Press Enter.
You will be prompted to enter the New Password.
3. Assign an administrator password keeping the length of password to 10
characters.
4. Type in New password and Press Enter.
5. You will be prompted to confirm the New Password, press Enter.
When the password has been changed, "Password changed" appears on the
screen.
Press the ← ← ← ← key to go back to the System Menu.
6.
Note: Write the password down, and keep in a secure place.
Issue 2.1 December 1999
4-50