MCK pbxgateway Administrator's Manual page 82

Configuration
Setting Voice Parameters continued
The following menu appears:
Figure 4.6. Default Voice Menu
Press the → → → → key to access the Method parameter and press the → → → → key to
2.
scroll through the various compression methods available.
Press the ↓ ↓ ↓ ↓ key to the Companding parameter and set accordingly.
3.
Press the ↓ ↓ ↓ ↓ key to the Jitter Delay parameter and set to 20 or greater if
4.
using RVP_Direct on Frame Relay or RVP_IP. Otherwise leave at 0.
Press the ↓ ↓ ↓ ↓ key to the Packet size parameter and set to 2.
5.
Note: May need to increase to 4 if using Frame Relay or RVP_IP
Press the ← ← ← ← key to accept changes and go back to the Configuration
6.
Menu.
Press the ↓ ↓ ↓ ↓ key to the Save parameter.
7.
8. Press Enter to save changes to the active config (.swt) file.
Issue 2.1 December 1999
4-21