MCK pbxgateway Administrator's Manual page 122

Configuration
IP Connection
continued
Note: The <Default> setting will connect all ports to the same PBXgateway.
Individual ports can be set to connect to different PBXgateway units by
simply selecting the port.
Press the → → → → key to the IP Destination parameter.
3.
4. Enter the IP address of the PBXgateway.
Note: Each port can actually have a unique IP Destination if you have
multiple PBXgateways. This address must be assigned by the network
administrator.
Press the ← ← ← ← key to accept changes and go back to the Configuration
5.
Menu. Press the ↓ ↓ ↓ ↓ key to the Save option. Press Enter.
Issue 2.1 December 1999
4-61