MCK pbxgateway Administrator's Manual page 160

The Management Interface (MI)
Usage: Used for applications that are "oversubscribed"
allowing the maximum use of available bandwidth. If
bandwidth is not available to a user and dynamic voice path
is enabled, they hear a "fast busy" and the call will be
blocked.
Oversubscribed: Number of users exceeds available
bandwidth.
Dependencies: Gateway only.
Recommendations: Constant
Primary
Parameter Location:
Interface
Remote->Configuration>Connect-
>RVP_Direct
Description: This parameter tells the PBXgateway which
Serial WAN port it should try to use in order to bring up
phone connections and voice paths. Your Primary
Connection port must coincide with the WAN port that is
enabled and connected to an appropriate network device. In
other words, if you select WAN 1 you must have WAN 1
enabled and connected to a network device.
Available Options:
WAN 1
WAN 2
Dependencies: The WAN port corresponding to this
connection parameter must be enabled and connected to
appropriate network equipment.
See also: Secondary Interface on page 5-32
Issue 2.1 December 1999
5-29