Section 3 Programming - Teledyne Foxy R1 Instruction Manual

®
Foxy R1 and Foxy
Fraction Collectors

Section 3 Programming

This section contains an overview of fraction collection pro-
gramming via the touch screen interface.
Programming via the touch screen supports basic collection
applications where the fraction collector is one of several discrete
components with or without a main controller. Control signals, if
any, are connected to the Pump or Detector connectors on the
back panel.
For advanced collection applications where the fraction collector
is part of a system directed by an external controller, refer to
Section 4, Serial Command Control. The fraction collector in
these applications is interfaced with an external controlling
device through the RS-232 Serial or Ethernet connectors, as well
as the optional pump and detector inputs.
Note
Should there be a need to control the fraction collector locally,
touch the computer icon to terminate the remote control.
Note
Additional touch screen programming resources can be found in
Appendix A.
®
R2
The display shows a computer icon if the system is
under remote control. Refer to Section 4 for serial
control programming instructions and to the docu-
mentation supplied with the controlling device.
The display shows a lock icon if the system is under
exclusive remote control. Refer to the documentation
supplied with the controlling device for programming
instructions.
3-1