Configuring And Programming The Sampler; Locking The Sampler - Teledyne 4700 Pocket Manual

Section 2 Installation
2.9 Configuring and
Programming the Sampler
To complete the installation, the sampler
software should be configured and
programmed. Refer to Section 3 for
instructions.
Configure the sampler to make sure that it
"knows" what bottle configuration is installed,
the length of the suction line, etc. Program the
sampler to specify how and when the sampler
should collect liquid samples.

2.10 Locking the Sampler

Locking the sampler is an optional step that
can prevent tampering with the sampler
operation or collected samples.
To prevent tampering with the sampler
operation, the sampler has a PROGRAM
LOCK. When enabled, this software feature
requires a numeric password to access most of
the control panel functions. Refer to section
3.3.10 to enable this option.
To prevent tampering with the collected
samples, place a padlock on the refrigerator
door latch.
2-31