Displaying Connection Status - Edge-Core ECS4510-12PD Web Management Manual

Figure 30: Configuring Connections by Port Range
Displaying
Use the Interface > Port > General (Show Information) page to display the current
connection status, including link state, speed/duplex mode, flow control, and auto-
Connection Status
negotiation.
Parameters
These parameters are displayed:
◆
◆
◆
◆
◆
◆
◆
◆
◆
Port – Port identifier.
Type – Indicates the port type. (1000BASE-T, 1000BASE SFP)
Name – Interface label.
Admin – Shows if the port is enabled or disabled.
Oper Status – Indicates if the link is Up or Down.
Media Type – Media type used.
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
Oper Speed Duplex – Shows the current speed and duplex mode.
Oper Flow Control – Shows the flow control type used.
– 97 –
Chapter 4
| Interface Configuration
Port Configuration