Table of Contents
Advertisement
◆
Priority – The priority assigned to untagged ingress traffic. (Range: 0-7, where
7 is the highest priority; Default: 0)
Web Interface
To map a MAC address to a VLAN:
1.
Click VLAN, MAC-Based.
2.
Select Add from the Action list.
3.
Enter an address in the MAC Address field.
4.
Enter an identifier in the VLAN field. Note that the specified VLAN need not
already be configured.
5.
Enter a value to assign to untagged frames in the Priority field.
6.
Click Apply.
Figure 89: Configuring MAC-Based VLANs
To show the MAC addresses mapped to a VLAN:
1.
Click VLAN, MAC-Based.
2.
Select Show from the Action list.
Figure 90: Showing MAC-Based VLANs
– 165 –
Chapter 5
| VLAN Configuration
Configuring MAC-based VLANs
Advertisement
Chapters
Table of Contents
