◆
Interface – Displays a list of ports or trunks.
◆
Port – Port Identifier. (Range: 1-12)
◆
Trunk – Trunk Identifier. (Range: 1-6)
Web Interface
To configure the members of the traffic segmentation group:
1.
Click Interface, Traffic Segmentation.
2.
Select Configure Session from the Step list.
3.
Select Add from the Action list.
4.
Enter the session ID, set the direction to uplink or downlink, and select the
interface to add.
5.
Click Apply.
Figure 62: Configuring Members for Traffic Segmentation
– 133 –
Chapter 4
| Interface Configuration
Traffic Segmentation