Edge-Core ECS4510-12PD Web Management Manual page 58

Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu
Menu
Show MTU
IP Service
DNS
General
Configure Global
Add Domain Name
Show Domain Names
Add Name Server
Show Name Servers
Static Host Table
Add
Show
Modify
Cache
DHCP
Client
Relay Option 82
Snooping
Configure Global
Configure VLAN
Configure Interface
Show Information
PPPoE Intermediate Agent
Configure Global
Configure Interface
Show Statistics
(Continued)
Description
Shows the maximum transmission unit (MTU) cache for destinations that
have returned an ICMP packet-too-big message along with an acceptable
MTU to this switch
Domain Name Service
Enables DNS lookup; defines the default domain name appended to
incomplete host names
Defines a list of domain names that can
be appended to incomplete host names
Shows the configured domain name list
Specifies IP address of name servers for dynamic lookup
Shows the name server address list
Configures static entries for domain name to address mapping
Shows the list of static mapping entries
Modifies the static address mapped to the selected host name
Displays cache entries discovered by designated
name servers
Dynamic Host Configuration Protocol
Specifies the DHCP client identifier for an interface
Specifies DHCP relay servers, including DHCP option 82 information
Enables DHCP snooping globally, MAC-address verification, information
option; and sets the information policy
Enables DHCP snooping on a VLAN
Sets the trust mode for an interface
Displays the DHCP Snooping binding information
Point-to-Point Protocol over Ethernet Intermediate Agent
Enables PPPoE IA on the switch, sets access node identifier, sets generic
error message
Enables PPPoE IA on an interface, sets trust status, enables vendor tag
stripping, sets circuit ID and remote ID
Shows statistics on PPPoE IA protocol messages
– 58 –
Page
510
513
513
513
513
514
514
516
516
517
517
517
517
518
519
519
520
339
341
342
343
345
524
524
526
527