Table of Contents
Advertisement
Table 4: Switch Main Menu
Menu
Traffic
Rate Limit
Storm Control
Auto Traffic Control
Configure Global
Configure Interface
Priority
Default Priority
Queue
Trust Mode
DSCP to DSCP
Add
Show
CoS to DSCP
Add
Show
PHB to Queue
Add
Show
DiffServ
Configure Class
Add
Show
Modify
Add Rule
Show Rule
(Continued)
Description
Sets the input and output rate limits for a port
Sets the broadcast storm threshold for each interface
Sets thresholds for broadcast and multicast storms which can be used to
trigger configured rate limits or to shut down a port
Sets the time to apply the control response after traffic has exceeded the
upper threshold, and the time to release the control response after traffic
has fallen beneath the lower threshold
Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages
Sets the default priority for each port or trunk
Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode
Selects DSCP or CoS priority processing
Maps DSCP values in incoming packets to per-hop behavior and drop
precedence values for internal priority processing
Shows the DSCP to DSCP mapping list
Maps CoS/CFI values in incoming packets to per-hop behavior and drop
precedence values for priority processing
Shows the CoS to DSCP mapping list
Maps internal per-hop behavior values to hardware queues
Shows the PHB to Queue mapping list
Creates a class map for a type of traffic
Shows configured class maps
Modifies the name of a class map
Configures the criteria used to classify ingress traffic
Shows the traffic classification rules for a class map
Chapter 2
– 49 –
| Using the Web Interface
Navigating the Web Browser Interface
Page
201
202
204
206
207
211
212
218
219
219
219
221
221
221
215
215
215
225
226
226
226
226
226
226
Advertisement
Chapters
Table of Contents
