Edge-Core ECS4510-12PD Web Management Manual page 275

◆
MAC Address Mask – The filter rule will check for the range of MAC addresses
defined by the MAC bit mask. If you omit the mask, the system will assign the
default mask of an exact match. (Range: 000000000000 - FFFFFFFFFFFF;
Default: FFFFFFFFFFFF)
Web Interface
To add a MAC address filter for MAC authentication:
1.
Click Security, Network Access.
2.
Select Configure MAC Filter from the Step list.
3.
Select Add from the Action list.
4.
Enter a filter ID, MAC address, and optional mask.
5.
Click Apply.
Figure 174: Configuring a MAC Address Filter for Network Access
To show the MAC address filter table for MAC authentication:
1.
Click Security, Network Access.
2.
Select Configure MAC Filter from the Step list.
3.
Select Show from the Action list.
Figure 175: Showing the MAC Address Filter Table for Network Access
Network Access (MAC Address Authentication)
– 275 –
Chapter 12
| Security Measures