Table of Contents
Advertisement
Table 29: Supported Notification Messages
Model
swMemoryUtiRisingThreshold
Notification
swMemoryUtiFallingThreshold
Notification
dhcpRougeServerAttackTrap
macNotificationTrap
sfpThresholdAlarmWarnTrap
userAuthenticationFailureTrap
userAuthenticationSuccessTrap
loginTrap
logoutTrap
* These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the SNMP
Configuration menu.
(Continued)
Level
1.3.6.1.4.1.259.10.1.37.2.1.0.109
1.3.6.1.4.1.259.10.1.37.2.1.0.110
1.3.6.1.4.1.259.10.1.37.2.1.0.114
1.3.6.1.4.1.259.10.1.37.2.1.0.138
1.3.6.1.4.1.259.10.1.37.2.1.0.189
1.3.6.1.4.1.259.10.1.37.2.1.0.199
1.3.6.1.4.1.259.10.1.37.2.1.0.200
1.3.6.1.4.1.259.10.1.37.2.1.0.201
1.3.6.1.4.1.259.10.1.37.2.1.0.202
– 389 –
Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
Group
This notification indicates that the memory utilization
has risen from memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
This notification indicates that the memory utilization
has fallen from memoryUtiRisingThreshold to
memoryUtiFallingThreshold.
This trap is sent when receiving a DHCP packet from a
rouge server.
This trap is sent when there are changes of the
dynamic MAC addresses on the switch.
This trap is sent when the SFP's A/D values are not
within alarm/warning thresholds.
This trap will be triggered if authentication fails.
This trap will be triggered if authentication is
successful.
This trap is sent when a user logs in.
This trap is sent when a user logs out.
Advertisement
Chapters
Table of Contents
