◆
VLAN ID – The VLAN identifier (VID) for the port as defined in IEEE 802.1Q. A
value of zero indicates that the port is using priority tagged frames, meaning
that only the IEEE 802.1D priority level is significant and the default PVID of the
ingress port is used instead.
◆
DSCP Value – The DSCP value to be used to provide Diffserv node behavior for
the specified application type. This field may contain one of 64 code point
values (0-63). A value of 0 represents use of the default DSCP value as defined in
RFC 2475.
Port Details – Location Identification
◆
Location Data Format – Any of these location ID data formats:
Coordinate-based LCI
■
latitude, longitude resolution, longitude, altitude type, altitude resolution,
altitude, and datum.
Civic Address LCI
■
CA value. "What" is described as the field entry "Device entry refers to"
under
"Configuring LLDP Interface
described under
ECS ELIN – Emergency Call Service Emergency Location Identification
■
Number supports traditional PSAP-based Emergency Call Service in North
America.
◆
Country Code – The two-letter ISO 3166 country code in capital ASCII letters.
(Example: DK, DE or US)
◆
What – The type of device to which the location applies as described for the
field entry "Device entry refers to" under
Attributes. "
Port Details – Extended Power-via-MDI
◆
Power Type – Power Sourcing Entity (PSE) or Power Device (PD).
◆
Power Priority – Shows power priority for a port. (Unknown, Low, High,
Critical)
◆
Power Source – Shows information based on the type of device:
PD – Unknown, PSE, Local, PSE and Local
■
PSE – Unknown, Primary Power Source, Backup Power Source - Power
■
conservation mode
7. Location Configuration Information
Chapter 13
6
– Defined in RFC 3825, includes latitude resolution,
7
7
– Includes What, Country code, CA type, CA length and
Attributes. " The the other items and
"Configuring LLDP Interface
"Configuring LLDP Interface
6
– 369 –
| Basic Administration Protocols
Link Layer Discovery Protocol
Civic-Address. "