Displaying Details For Remote Meps - Edge-Core ECS4510-12PD Web Management Manual

12-port gigabit ethernet layer 2 switch

Hide thumbs Also See for ECS4510-12PD:

Table of Contents

| Basic Administration Protocols

Connectivity Fault Management

Displaying Details for

Select Show Remote MEP from the Action list.

Figure 305: Showing Information on Remote MEPs

Use the Administration > CFM > Show Information (Show Remote MEP Details)

page to show detailed information for MEPs located on other devices which have

been discovered through continuity check messages, or statically configured in the

MEP database and verified through cross-check messages.

These parameters are displayed:

MD Index – Domain index. (Range: 1-65535)

MA Index – MA identifier. (Range: 1-2147483647)

MEP ID – Maintenance end point identifier. (Range: 1-8191)

MD Name – Maintenance domain name.

MA Name – Maintenance association name.

Level – Authorized maintenance level for this domain.

MAC Address – MAC address of this MEP entry.

Primary VLAN – Service VLAN ID.

Incoming Port – Port to which this remote MEP is attached.

CC Lifetime – Length of time to hold messages about this MEP in the CCM

Age of Last CC Message – Length of time the last CCM message about this

MEP has been in the CCM database.

Frame Loss – Percentage of transmitted frames lost.

CC Packet Statistics – The number of CCM packets received successfully and

those with errors.

Chapters

Table of Contents