Table of Contents
Advertisement
Figure 75: Configuring GVRP for an Interface
To show the dynamic VLAN joined by this switch:
1.
Click VLAN, Dynamic.
2.
Select Show Dynamic VLAN from the Step list.
3.
Select Show VLAN from the Action list.
Figure 76: Showing Dynamic VLANs Registered on the Switch
To show the members of a dynamic VLAN:
1.
Click VLAN, Dynamic.
2.
Select Show Dynamic VLAN from the Step list.
3.
Select Show VLAN Members from the Action list.
– 149 –
Chapter 5
| VLAN Configuration
IEEE 802.1Q VLANs
Advertisement
Chapters
Table of Contents
