FujiFilm SonoSite M-Turbo User Manual page 38

Dual Displays side-by-side 2D images.
Select Dual, and then press the
key to display the second
UPDATE
screen and to toggle between the
screens. With both images frozen,
press the
between the images.
To return to full-screen 2D imaging,
select Dual or press the 2
LVO On, LVO On turns on Left Ventricular
LVO Off Opacification. LVO Off turns off this
option.
Use LVO for cardiac exams in 2D
imaging mode when using an
imaging contrast agent. LVO lowers
the mechanical index (MI) of the
system to enhance visualization of
the contrast agent and endocardial
border.
This option depends on transducer
and exam type.
Orientation Select from four image orientations:
U/R (Up/Right), U/L (Up/Left), D/L
(Down/Left), D/R (Down/Right).
Brightness Adjusts the display brightness.
Settings range from 1 to 10.
The display brightness affects
battery life. To conserve battery life,
adjust brightness to a lower setting.
26 Imaging modes
key to toggle
UPDATE
key.
D
Guide Turns guidelines on and off.
Guidelines are for needle guidance,
are an optional feature, and depend
on transducer type.
For transducers with a single-angle
or multi-angle bracket, the
touchpad moves the depth cursor.
If the transducer uses a multi-angle
bracket, select Guide and then
select the angle:
A, B, or C. To exit angle selection,
select Back. To clear the guides, do
either of the following:
• Select the angle again (A, B, or C).
• Exit angle selection and press
Guide.
See also the needle guide's user
documentation.
Sector (Cardiac exam) Specifies the sector
width.
SonoMB On is available only for
Sector Full.
SonoMB MB On and MB Off turn SonoMB™
(MB) multi-beam imaging technology on
and off. When SonoMB is on, MB
appears in the upper left-hand
screen.
SonoMB depends on transducer and
exam type.
ECG Displays the ECG trace. See
Monitoring"
This feature is optional and requires
a SonoSite ECG cable.
Clips Displays the clips options. See
capture and save a clip"
This feature is optional.
"ECG
on page 45.
"To
on page 42.