Audio, Battery Setup; Cardiac Calculations Setup; Connectivity Setup - FujiFilm SonoSite M-Turbo User Manual

To import predefined label groups
1 Insert the USB storage device that contains the
label groups.
2 On the Annotations setup page, select Import
on‐screen.
3 Select the USB storage device, and then select
Import.
4 Select Done in the dialog box that appears.
All predefined label groups for all exams are
replaced with those from the USB storage
device.

Audio, Battery setup

On the Audio, Battery setup page, you can select
options in the following lists:
Key click Select On or Off for keys to click when
pressed.
Beep alert Select On or Off for the system to beep
when saving, warning, starting, or shutting
down.
Sleep delay Select Off, or 5 or 10 minutes to
specify the period of inactivity before the system
goes into sleep mode.
Power delay Select Off, or 15 or 30 minutes to
specify the period of inactivity before the system
automatically turns off.

Cardiac Calculations setup

On the Cardiac Calculations setup page, you can
specify measurement names that appear in the
Tissue Doppler Imaging (TDI) calculations menu
and on the report page.
See also "Cardiac calculations" on page 56.
To specify cardiac measurement names

Under TDI Walls on the Cardiac Calculations
setup page, select a name for each wall.

Connectivity setup

On the Connectivity setup page, you specify
options for using non‐USB devices and for alerts
when internal storage is full. You also import
wireless certificates and specify settings
(including Transfer Mode and Location) for
SiteLink™ Image Manager and DICOM
are optional features. For SiteLink issues, refer to
the SiteLink Image Manager user guide. For
DICOM issues, such as storage commitment,
archivers, and MPPS, refer to Sending and
Receiving DICOM Data on SonoSite Systems.
To configure the system for a
1 Set up the printer hardware. (See instructions
included with the printer or docking system.)
2 In the Printer list on the Connectivity setup
page, select the printer.
To configure the system for a DVD recorder,
PC, or serial bar code scanner
1 On the Connectivity setup page, do the
following:
• (DVD recorder) In the Video Mode list,
select the video standard: NTSC or PAL.
• In the Serial Port list, select the peripheral.
Computer (PC) allows patient report data
to be sent as ASCII text from the system to
a PC. The PC must have third‐party
software to acquire, view, or format the
data into a report. Check the compatibility
of your software with SonoSite Technical
Support. (See also "To send a patient
report to a PC" on page 77.)
Note: Because these peripherals use the same
RS‐232 connector on the mini‐dock, you can
connect only one of them at a time.
2 Restart the system.
Chapter 2: System Setup
® , which
printer
19