FujiFilm SonoSite M-Turbo User Manual page 20

WARNING: To avoid damaging the USB storage
device and losing patient data from
it, observe the following:
• Do not remove the USB storage
device or turn off the ultrasound
system while the system is
exporting.
• Do not bump or otherwise apply
pressure to the USB storage
device while it is in a USB port on
the ultrasound system. The
connector could break.
Caution: If the USB icon does not appear in
the system status area on-screen,
the USB storage device may be
defective or password-protected.
Turn the system off and replace the
device.
8 Screen layout
To insert a USB storage device

Insert the USB storage device into any USB
port on the system or mini‐dock. See Figure
on page 1.
The USB storage device is ready when the
USB icon appears.
To view information about the device, see
"USB Devices setup" on page 23.
To remove a USB storage device
Removing the USB storage device while the
system is exporting to it may cause the exported
files to be corrupted or incomplete.
1 Wait five seconds after the USB animation
stops.
2 Remove the USB storage device from the port.
1