FujiFilm SonoSite M-Turbo User Manual page 80

IMT Calculations (2D)
Menu Heading Available Measurements
Right-IMT Ant N (Anterior Near Wall)
Left-IMT Ant F (Anterior Far Wall)
Lat N (Lateral Near Wall)
Lat F (Lateral Far Wall)
Post N (Posterior Near Wall)
Post F (Posterior Far Wall)
IMT 1
IMT 2
IMT 3
IMT 4
IMT 5
IMT 6
IMT 7
IMT 8
Plaque Plaq 1
Plaq 2
To calculate IMT automatically
1 On a frozen 2D image, press the
2 From the calculations menu, select the
measurement.
3 Using the touchpad or arrow keys, position
the IMT tool over the area of interest until the
measurement results appear.
Adjust the tool, and edit as needed. See "IMT
4
tool options" on page 68.
5 Save the calculation. (See "To save a
calculation" on page 51.)
68 Exam-based calculations
IMT tool options
When using the IMT tool, you can select the
following options on‐screen.
Option
Hide
Move
Width
Edit
Smooth
Adven
key.
CALCS
Lumen
Description
Use to check results. Hides the
measurement results and trace
line. Select Show to redisplay
them.
Repositions the tool horizontally
by several pixels. The upper key
moves the tool right, and the
lower key moves the tool left.
Adjusts the tool width by 1 mm.
The upper key increases the
width, and the lower key
decreases the width.
Displays Smooth, Adven, and
Lumen.
Adjusts the IMT line smoothing.
Select Edit to display this option.
Adjusts the adventitia-media
line. The upper key moves the
line upward. The lower key
moves the line downward.
Select Edit to display this option.
Adjusts the lumen-intima line.
The upper key moves the line
upward. The lower key moves the
line downward.
Each of the two IMT lines can be
adjusted independently.
Select Edit to display this option.