Digsi ® 4 Tool - Siemens siprotec 7SA522 User Manual

®
4.2.2 DIGSI 4 Tool
User Guide
Configuring
Inputs and Outputs
Passwords
Commissioning
Aids
Help System
7SA522 Manual
C53000-G1176-C119-2
®
DIGSI 4 uses the familiar Windows operating environment.
®
In DIGSI 4 only the settings that are available within a specific device are shown in
the specific windows. If a protective feature is changed from disabled to enabled in the
Device Configuration, then the settings relevant to that feature become available.
Entering settings for SIPROTEC
offered, such as context menus, pop-up lists for the selection of available options, and
specific limits for the entry of numerical values.
A configuration matrix is used to assign the binary inputs, output relays, and LEDs. In-
formation to be stored in the various buffers and transmitted via the system interface
is also selected in this matrix. The setting options are presented in an easy-to-read
tabular format. Parts of the matrix can be minimized or expanded as desired to simplify
the displayed sections, and therefore the setting process. Filter functions can reduce
the size of the matrix to display only relevant information.
Password entry is required for tasks such as changing settings, executing control
commands, or exercising the test and diagnostics features. The passwords protect
against unauthorized access to these critical tasks.
®
DIGSI 4 simplifies commissioning with test functions for the binary inputs, outputs
and LEDs. Control of primary equipment can be done. The measured values of the
device can be viewed with the program. Oscillographic fault records can be triggered
®
with DIGSI 4.
The help system clarifies the individual functions and settings, and provides additional
support.
Note:
Detailed information about DIGSI
number E50417-H1176-C097.
®
4 devices is easy due to many types of assistance
®
4 can be found in the DIGSI
®
SIPROTEC 4 Devices
®
4 Manual, order
4-7