Siemens siprotec 7SA522 User Manual page 588

Appendix
Addr. Setting Title
3515 SYNC-CHECK
3516 Usync> U-line<
3517 Usync< U-line>
3518 Usync< U-line<
3519 OVERRIDE
3530 Op.mode with MC
3531 MC maxVolt.Diff
3532 MC maxFreq.Diff
3533 MC maxAngleDiff
3535 MC SYNCHR
3536 MC Usyn> Uline<
3537 MC Usyn< Uline>
3538 MC Usyn< Uline<
3539 MC O/RIDE
3701 Uph-e>(>)
3701 FCT Uphase-e
3702 Uph-e>
3703 T Uph-e>
3704 Uph-e>>
3705 T Sen-Imp(Uphe)
3721 3U0>(>) (or Ux)
3722 3U0>
3723 3U0 Reset Ratio
3724 T 3U0
3725 T Sen-Imp 3UO
3802 START
3805 Paral.Line Comp
3806 Load Compensat.
3901 FCT BreakerFail
B-16
Function Setting Options
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Synchronism and with consideration of CB
Voltage Check closing time
without consideration of CB
closing time
Synchronism and 1.0..40.0 V
Voltage Check
Synchronism and 0.03..2.00 Hz
Voltage Check
2..60 °
Synchronism and
Voltage Check
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Synchronism and YES
Voltage Check NO
Voltage Protection OFF
Alarm Only
ON
Voltage Protection OFF
Alarm Only
ON
Voltage Protection 1.0..170.0 V
Voltage Protection 0.00..30.00 sec
Voltage Protection 1.0..170.0 V
Voltage Protection 0.05..0.50 sec
Voltage Protection OFF
Alarm Only
ON
Voltage Protection 1.0..220.0 V
Voltage Protection 0.50..0.95
Voltage Protection 0.00..30.00 sec
Voltage Protection 0.05..0.50 sec
Fault Locator Pickup
TRIP
Fault Locator NO
YES
Fault Locator NO
YES
Breaker Failure ON
OFF
Default Setting
YES Live bus / live line and Sync before AR
NO Live bus / dead line check before AR
NO Dead bus / live line check before AR
NO Dead bus / dead line check before AR
NO Override of any check before AR
without consideration of CB Operating mode with Man.Cl
closing time
2.0 V Maximum voltage difference
0.10 Hz Maximum frequency difference
10 °
Maximum angle difference
YES Live bus / live line and Sync before MC
NO Live bus / dead line check before
Man.Cl
NO Dead bus / live line check before
Man.Cl
NO Dead bus / dead line check before
Man.Cl
NO Override of any check before Man.Cl
OFF Operating mode Uph-e overvoltage
prot.
ON Phase-Earth Overvoltage function is
85.0 V Uph-e> Pickup
2.00 sec T Uph-e> Time Delay
100.0 V Uph-e>> Pickup
0.25 sec Time of Carrier Send Impulse (Uph-e)
OFF Operating mode 3U0 (or Ux) overvolt-
age
30.0 V 3U0> Pickup (or Ux>)
0.80 3U0 (or Ux) Reset ratio
2.00 sec T (3U0 or Ux) Time Delay
0.25 sec Time of Carrier Send Impulse (3U0 or
Ux)
Pickup Start fault locator with
NO Mutual coupling parall.line compensa-
tion
NO Load Compensation
ON Breaker Failure Protection is
Comments