Tagging - Siemens siprotec 7SA522 User Manual

Distance protection

Hide thumbs Also See for siprotec 7SA522:

Table of Contents

Control During Operation

Tagging

From PC with

$QQXQFLDWLRQ

Tagging Equipment from the HMI

ble clicking on 0DVNLQJ ,2, the matrix is opened. Mark the switching device (in the

line for the operating message of the switching device). Using the right mouse key, the

properties of the switching device can now be called up. The conditions for ,QWHU

ORFN 6ZLWFKLQJ, among other items, are recognizable in the dialog box that opens.

Active test conditions are identified with a check mark.

To identify unusual operating conditions in the power system, tagging can be done.

The tagging can, for example, be entered as additional operating conditions in inter-

locking checks, which are set up with CFC. Tagging is configured in the same way as

for operating devices.

With a device ready for operation, first press the

key, select the menu item &RQWURO and move to editing the control func-

key. The selection &21752/ appears.

tions with the

Select the item 7DJJLQJ with the

key. The selection 7$**,1* appears. See Figure 7-50.

• The status of the tagging is displayed 7DJJLQJ → 'LVSOD\,

or changed using

• 7DJJLQJ → 6HW.

%UHDNHU6ZLWFK

The Manual Overwrite function is always done using the HMI on the SIPROTEC

key. The 0$,1 0(18 appears.

key and switch to the next selection using the

7SA522 Manual

C53000-G1176-C119-2

Show Quick Links

Table of Contents

Siprotec 7sa522