Siemens siprotec 7SA522 User Manual page 129

Cyclical Restora-
tion
7SA522 Manual
C53000-G1176-C119-2
Here, the user may specify the source of the cyclical trigger for the transfer. Also, the
user may set the time interval and determine whether the metered value buffer should
be deleted after transfer to the SIPROTEC
Figure 5-27 Dialog Box to Restore Metered Values and Program Cyclical Restoration
In the current version of DIGSI
Absolute time.
®
-device has taken place.
®
4, triggering occurs based on the programmed
Configuration
5-31