Enable/Disable Early Encryption
l
Configure Coder
l
Configure Supplementary Services
l
Select Master Mode
l
Configure Trunks
l
Enable/Disable Radio
l
Multiple Radio Configuration
l
Assign PARI
l
Enter SARI
l
Configure Air Synchronization
l
Change System Name and Password
Note: This is only applicable for a Master, never on a Slave. The system name and password must be
the same for all IPBS/IPBLs throughout the system. Reset in order to make the changes take effect, see
Reset
1. Select DECT > System.
2. Note: To access the System tab, the Master mode has to be activated, see
Mode
3. Write a system name in the System Name text field.
4. Enter a new password in the Password text field. Repeat the password.
5. Click "OK".
Note: It is recommended to create a backup of the IPBS configuration when the password has been
changed, see
Set Subscription Method
The IP-DECT system can be set to use the following subscription methods:
With User AC - Individual Registration and Auto Registration is possible.
l
With System AC - Anonymous Registration and Individual Registration is possible.
l
Disable - Registration is not possible.
l
Select subscription method:
1. Select DECT > System.
Avaya 374x DECT Telephones - User Guide
on page 141.
on page 103.
Backup
on page 132.
Operation
Select
99
02/2016