Table of Contents
Advertisement
1. Select DECT Sync > Air Sync Overview.
2. Click on the region ID text at top above the sync tree.
3. In the Region Details window, click "Start". When resynchronizing, all ongoing calls in the
region will be disconnected.
IPBS Details
1. Select DECT Sync > Air Sync Overview.
2. Click on the "Details" text link above the sync tree. The sync tree will now display name
and sync lost counter for the IPBSs in the region. The sync lost counter is a counter that is
incremented when the IPBS stops to handle radio traffic for a while and after that restarts
the synchronization procedure.
Disturbances
This section only applies to the Master.
1. Select DECT Sync > Disturbances.
2. Click "Start".
A list of potential disturbances is shown, that is, alien DECT systems that have a higher signal
strength than the current sync signal.
Status
This section only applies to the IPBS.
Air Sync status is displayed in the DECT Sync > Status menu. For explanation on the
information shown for the active and the alternative sync bearers, see the table below.
Sync offset
Drift
Sync lost counter
RFPI
Carrier
Slot
Hop
RSSI
FER
130
Avaya 374x DECT Telephones - User Guide
Figure 20.
Adjustment of frequency in progress performed by the current
IPBS so it can be in synchronization with the synch source.
The time difference between the current IPBS and its sync source.
A counter that is incremented when the IPBS stops to handle radio
traffic for a while and after that restarts the synchronization
procedure.
Radio Fixed Part Identity is the Id number of the sync bearer.
The carrier used for air synchronization
The slot used for air synchronization
The number of hops from the Sync Master to the sync bearer
Received Signal Strength Indication
Frame Error Rate, a value between 0 and 100%. Should be below
90% to be able to keep the synchronization.
02/2016
Hide quick links:
Advertisement
Table of Contents
