Configure The Standby Master - Avaya IPBS1 Installation And Operation Manual

18. Configure air synchronization, see
19. Enter the Time Server address, see
20. Reset in order to make the configuration changes take effect, see

Configure the Standby Master

It is recommended to have a Standby Master in the IP-DECT system. This section describes
how to configure a Standby Master. Each configuration step is briefly described in the step list
below, for more detailed information see the corresponding subsection in
page 71.
1. Determine the address and access the GUI, see
2. Change the default password, see
3. Configure LDAP replicator, enter the IP address, user name and password to the LDAP
server. Alternative LDAP server must not be entered. Select the Enable check box, see
Configure LDAP Replicator
4. Set a static IP address and set DHCP to off, see
5. Enter system name and password, this should be the same system name and password
as in the Master. See
6. Enter Primary Master IP Address.
7. Set the mode to Standby Master, see
8. Configure the Master settings, see
9. Enter Master IP address, see
10. Select supplementary services, see
11. Assign PARI, see
12. Configure air synchronization, see
13. Enter WSM IP address, see
14. Enter the Time Server address, see
15. Configure LDAP replicator, enter the IP address, user name and password to the LDAP
server. Alternative LDAP server must not be entered. Check the Enable check box, see
Configure LDAP Replicator
16. Reset in order to make the configuration changes take effect, see
If problem to access the Standby Master from a certain PC after the reset;
Open a command window in windows by selecting Start > Run and enter "cmd" in the
l
Open: text field.
Avaya 374x DECT Telephones - User Guide
Configure Air Synchronization
Trust List
Change the Default Password
on page 97.
Change User Name and Password
Select Mode
Configure Gatekeeper
PARI on page 108.
PARI
PARI on page 108.
Configure Air Synchronization
Configure Messaging
Trust List
on page 97.
on page 84.
Access the GUI
Set a Static IP Address
on page 72.
on page 103.
on page 104.
on page 108.
on page 111.
on page 84.
Configuration
on page 109.
Reset on page 141.
Operation on
on page 53.
on page 56.
on page 92.
on page 109.
Reset on page 141.
02/2016
65