Configure Ldap Replicator; Configure Full Directory Replication - Avaya IPBS1 Installation And Operation Manual

write connections - Number of write-enabled connections
l
rx search - Number of received search requests
l
rx modify - Number of received change requests
l
rx add - Number of added objects
l
rx del - Number of deleted objects
l
rx abandon - Number of lost connections
l
tx notify - Number of sent change notifications
l
tx error - Number of sent error notifications
l
tx error 49 - Number of sent error notifications due to invalid credentials
l
tx error 50 - Number of sent error notifications due to insufficient access rights
l

Configure LDAP Replicator

LDAP Replicators are usually configured in the following cases:
User data is replicated from the Master to the Standby Master. The replicator is configured
l
on the Standby Master (Full Directory Replication)
User data is replicated from the PBX to the Master. The replicator is configured on the
l
Master (Full Directory Replication)

Configure Full Directory Replication

1. Select LDAP > Replicator.
2. Select the Enable check box.
3. Enter the IP address to the LDAP server in the Server text field.
4. Enter the IP address to the alternative LDAP server in the Alt. Server text field.
5. NOTE: If this IPBS/IPBL is configured as an alternative/standby LDAP server, enter
"0.0.0.0" in the Alt. Server text field.
6. Select a filter method from the Filter Type drop-down list
Dect Gateway Name - Enter the name of the DECT gateway to limit the replication to
l
users of a certain group
LDAP Filter - Enter an LDAP filter to limit replication to certain LDAP objects
l
7. Enter the LDAP User name and Password in the User and Password text fields.
8. Click "OK".
Avaya 374x DECT Telephones - User Guide
Operation
97
02/2016