Service Discovery - Avaya IPBS1 Installation And Operation Manual

If a specific Device Manager (for example AIWS2) is to be used in the IP-DECT system, enter
the IP address to the Device Manager following the steps below. To set the Master to search for
an existing Device Manager on the network, go to
For Portable Devices, do as follows:
1. Select UNITE > Device Management.
2. In the Portable Devices section: Enter the address to the Device Manager in the IP
Address text field.
3. The IP address for the Device Manager that the Master is currently connected to is shown
under Active Settings.
4. Click "OK".
For IP-DECT Devices, do as follows:
1. Select UNITE > Device Management.
2. In the IP-DECT Devices section: Enter the address to the Device Manager in the IP
Address text field.
3. The IP address for the Device Manager that the Master is currently connected to is shown
in the Unite Address text field.
4. Enter the Resource Identity/Service in the Resource Identity text field. The default is
IPDECT.
5. Click "OK".

Service Discovery

If no Device Manager (for example AIWS2) has been selected to be used in the IP-DECT
system, see
existing Device Manager on the network. To set the Master to search in a specific domain on the
network or to stop the search, follow the steps below.
1. Select UNITE > Service Discovery.
2. NOTE: To access the Service Discovery tab, the Master mode has to be activated, see
Select Mode
3. Do one of the following:
To stop the Master to search for a Device Manager, select the Disable check box.
l
To set the Master to search for a Device Manager in a specific domain on the network,
l
enter the domain id in the Domain ID text field. The domain id must be the same as the
one entered in the Device Manager.
4. Click "OK".
112
Avaya 374x DECT Telephones - User Guide
Device Management
on page 103.
Service Discovery
on page 111, then the Master will automatically search for an
on page 112.
02/2016