Add Radios - Avaya IPBS1 Installation And Operation Manual

l
Name
RFPI
IP Address
Sync
Region
Device Name
LDAP
Version
Connected Time

Add Radios

In the Uninitalized Registrations section, uninitialized Radios not registered to a Master are
shown.
1. Select Device Overview > Radios
2. Click "Add" to add the Radio to the Master.
3. In the Add Radio window enter a name for the device. You can also add a Standby Master
IP Address and a Sync Region.
4. Click "OK".
122
Avaya 374x DECT Telephones - User Guide
Figure 17.
Figure 18.
The unique identification name. The name syntax is
ipbs-xx-xx-xx (IPBS1), ipbs2-xx-xx-xx (IPBS2) or
ipbl-xx-xx-xx (IPBL), where xx-xx-xx should be
replaced with the last 6 hexadecimal digits of the
MAC address.
Radio Fixed Part Identity.
The IP address, click on the IP address to access the
configuration GUI of that IPBS/IPBL.
The current synchronization status.
Should be "Master OK", "Slave OK" or "Standby
OK" if synchronized. "Standby" is a Radio
configured as a Sync Master but it is active.
The sync region which the Radio belongs to.
The name entered in the general menu.
The LDAP status, can be "" (blank), "-", "up",
"server" or "down".
Should be "-", "up" or "server".
The current software version.
The elapsed time since connected to the Master.
02/2016