Configure Ip Settings; Ldap - Avaya IPBS1 Installation And Operation Manual

IP

Configure IP Settings

The following settings can be done in the IP settings sub menu:
ToS priority,
RTP Data and VoIP Signalling:
RTP ports:
1. Select IP > Settings.
2. Enter the ToS priority value (recommended value is "0xb8") in the ToS Priority - RTP Data
text field.
3. Enter the ToS priority value (recommended value is "0x68") in the ToS Priority - VoIP
Signalling text field.
4. Select which ports to use for RTP traffic by entering the first port in the First UDP-RTP Port
text field.
5. Enter the number of ports to use in the Number of Ports text field.
6. Click "OK".
Routing
View the IP routing by Select IP > Routing.

LDAP

The Lightweight Directory Access Protocol (LDAP) protocol is required for systems in which the
server and a replicating client access a joint user database. All IPBSs/IPBLs in the system have
access to the database, one of the IPBSs/IPBLs can be configured to be the LDAP server.
Avaya 374x DECT Telephones - User Guide
a. VoIP Signalling includes roaming, handover, registrations towards the IP-PBX etc.
Determines the priority from the ToS field in the IP
header. This function can be used if the router can use
ToS priority control.
Hexadecimal, octal or decimal values can be used;
0x10, 020 and 16 are all equivalent.
There are two fields for ToS priority, one for RTP Data
and one for VoIP Signalling
example http and ldap) are not prioritized and use
0x00.
NOTE: Remember that the same value should be set in
the ToS field for all devices.
If the ports fields are left blank, the ports 16384 to
32767 will be used.
a
. Other types of traffic (for
02/2016
Operation
95