Table of Contents
Advertisement
16. Select Update > Config and browse to the previously saved configuration. Click "OK".
17. Reset in order to make the configuration changes take effect, see
18. Repeat step 1 to 3 for all Slaves.
Configure Deployment
This section describes how to configure an IPBS for deployment used for coverage test of air
sync and speech.
NOTE: For coverage test of air sync, two IPBSs must be configured, one as Sync Master and
one as Sync Slave.
Each configuration step is briefly described in the step list below. For more detailed information
see the corresponding subsection in
1. Determine the IP address and access the GUI, see
2. Change the default password, see
3. Set a static IP address and set DHCP to off, see
4. Set the mode to Master, see
5. Perform a reset to restart the IPBS/IPBL in Master mode, see
6. Select system name and password, see
page 99.
7. Set subscription method, see
8. Configure authentication code, see
9. Set default language, see
10. Set frequency band, see
11. Enable carriers, see
12. Set Master Id, see
13. Assign PARI, see
of air sync, both IPBS must have the same system ID.
14. Enter SARI, see
15. Reset in order to make the configuration changes take effect, see
16. For coverage test of speech sync, register one handset in the IPBS configured as Sync
Master, see
17. Set the mode to Deployment, see
Avaya 374x DECT Telephones - User Guide
Operation
Select Mode
Set Subscription Method
Set Default Language
Set Frequency Band
Enable Carriers
Configure Gatekeeper
PARI
on page 108. Note: If two IPBss are configured for coverage test
SARI
on page 108.
Add Users
on page 68.
on page 71.
Access the GUI
Change the Default Password
Set a Static IP Address
on page 103.
Change System Name and Password
Configure Authentication Code
on page 100.
on page 100.
on page 101.
on page 104.
Select Mode
on page 103.
Reset
on page 141.
on page 53.
on page 56.
on page 92.
Reset
on page 141.
on page 99.
on page 100.
Reset
on page 141.
Configuration
on
67
02/2016
Hide quick links:
Advertisement
Table of Contents
