Check Ldap Replicator Status; Dect - Avaya IPBS1 Installation And Operation Manual

Note: In the case of Master to Standby Master Full Directory Replication, do not register new handsets
when the LDAP Server is down even if there is a Standby LDAP Server in the system.

Check LDAP Replicator Status

1. Select LDAP > Replicator-Status.
The following information is displayed:
Server - The IP address and port of the LDAP server.
l
Remote - State of replication in the source directory. Three states are possible:
l
Stopped, Active, Completed
Notify - Number of change notifications received from the server
l
Paged - Number of objects received from AD server in response to paged search
l
requests
No match - Number of objects received that are not matching the configured LDAP
l
filter condition
Discarded - Number of objects discarded because no suitable map is found
l
Local - State of replication in the destination directory. Three states are possible:
l
Stopped, Active, Completed
Notify - Number of change notifications sent to the server
l
Add - Number of locally added objects
l
Del - Number of locally deleted objects
l
Modify - Number of locally modified objects
l
Pending - Number of local objects waiting to be sent to the server
l
Expert tool
The Expert function should only be used after consultation with Ascom Technical Support.

DECT

This section describes how to do the following configurations and settings.
Change System Name and password
l
Change Subscription Method
l
Configure Authentication Code
l
Set Default Language
l
Set Frequency Band
l
Enable/Disable Carriers
l
98
Avaya 374x DECT Telephones - User Guide 02/2016