Overview Of The Ipbl; Power Supply - Avaya IPBS1 Installation And Operation Manual

Overview
IP DECT Gateway
Pos.
1
2
3
4
5
6

Power Supply

The power supply are located at the rear of the IPBL. The IPBL can be powered using the
following alternatives:
110/230 VAC (only IPBL IP-DECT Gateway VAC/VDC)
l
Note: For more information, see
Software
The software in the IPBL can be updated by downloading new software without disconnecting
the equipment. The new software is stored in flash memory. See
and DB1 on page 132 for information.
Avaya 374x DECT Telephones - User Guide
LAN Synchronization
1 2 ring in ring out
1 2 3 4
Figure 4. Overview of the IPBL
Name
Reset
Status LED
Lan
Synchronization
Reference
Base station 01-16
Base Station 01 02
Reference
in out 09 10
5
Function
Resets the IPBL, see Reset Using the Reset Button
page 142 for more information.
Indicates the status on the IPBL.
10BASE-T/100BASE-T Ethernet interface.
LAN1 port must be used in the IP-DECT system (LAN2 port
is for administration only).
Sync ring in and sync ring out interfaces.
Reference sync in and reference sync out interfaces.
ISDN U DECT base station interfaces.
PN
Power the IPBL on page 50.
03 04 05 06 07 08
11 12 13 14 15 16
6
System Downgrade for IPBS2
Description
on
17
02/2016