Ipbs2 - Avaya IPBS1 Installation And Operation Manual

IPBS1 with External Antennas
The IPBS1 is available with two omni-directional external antennas. Other external antennas
can be mounted as well. This section contains the differences between the IPBS1 with internal
and external antennas. For all other information see
Contents of the Box
The box in which the IPBS1 is packed contains:
l
An IPBS1 for external antennas
l
Two antennas
l
A mounting bracket
l
Two screws with wall plugs
l
Note: The IPBS1 cannot be mounted with the antennas pointing downwards as the mounting bracket
does not support it.
Insert the antennas into the IPBS1 before following the installation instructions in
Base Station

IPBS2

The following versions of the IPBS2 are available:
IPBS2 with internal antenna
l
IPBS2 with internal antenna for IP Office
l
IPBS2 with external antennas
l
The IPBS2 is backward compatible with the IPBS1 when it comes to coverage, functionality,
accessories and mounting bracket. If an old IPBS1 has to be replaced you just reuse the
mounting bracket and install the IPBS2.
IPBS2 with Internal Antenna
This description also applies to the IPBS2 with internal antenna for IP Office. The following
versions are available:
IPBS2-C3A/1A,
l
IPBS2-C4A/1A e
l
IPBS2-Z3A/1A
l
12
Avaya 374x DECT Telephones - User Guide
on page 35.
IPBS1 with Internal Antenna on page 10.
Install the
02/2016