Pinning - Avaya IPBS1 Installation And Operation Manual

Pinning

1. Cut the cable to the correct length and connect the cable to a RJ45 modular jack.
2. For information on the pinning of the data jack see the following:
IPBS,
l
BS3x0 and DB1,
l
Tip:
Do not plug the connector in the base station yet.
Tip:
Note: Since the distance between the base station and the wall is limited, a RJ45 modular jack without
cable retention must be used.
Avaya 374x DECT Telephones - User Guide
Pin the IPBS Cable
Pin the BS3x0/DB1 Cable
on page 42.
on page 43.
Installation of the Base Station
02/2016
41