Set Up The Client; Configure Ipbs/Ipbl As A Client In A Small Existing System; Join The Realm - Avaya IPBS1 Installation And Operation Manual

Set up the client

Depending on the type of system the IPBS/IPBL can be configured to act as a client in three
different ways:
Configure IPBS/IPBL as a client in a small existing system (few clients), see Configure
l
IPBS/IPBL as a client in a small existing system (few clients).
Configure IPBS/IPBL as a client in a large existing system (many clients),
l
see
page 75.
Configure IPBS/IPBL as a client in a new system, see
l
in a new system
Configure IPBS/IPBL as a client in a small existing system (few clients)
The location of the Kerberos server must be configured locally on each client. The server must
be configured as a client as well so that it can also join the realm. To configure each IPBS/IPBL
as a client, do the following:
1. Make sure that the IP address of a NTP time server is specified. Select General > NTP.
2. Select General > Admin.
3. Go to the Additional Kerberos encryption types section.
4. Select the Enable AES and RC4 check box.
5. Go to the Authentication Servers section.
6. In the Realm/Domain text field, enter the realm name specified in the Kerberos server.
7. In the Address text field, enter the IP address of the Kerberos server. In the Kerberos
server enter 127.0.0.1 (localhost) as the IP address. The Port and the Admin Port text
fields are filled out automatically with default ports. Note: If other than default ports are
used, in the text fields replace the default ports with the other ports.
8. In the Secondary Address text field, enter the IP address of the secondary Kerberos
server. In the secondary Kerberos server enter 127.0.0.1 (localhost) as the IP address.
The Secondary Port and the Secondary Admin Port text fields are filled out automatically
with default ports. Note: If other than default ports are used, in the text fields replace the
default ports with the other ports.
9. Click "OK".

Join the realm

To enable delegated authentication using the Kerberos server, each client must join the
Kerberos realm of the server. To join the realm, do the following:
74
Avaya 374x DECT Telephones - User Guide
Configure IPBS/IPBL as a client in a large existing system (many clients)
on page 76.
Configure IPBS/IPBL as a client
on
02/2016