Table of Contents
Advertisement
When the Master is connected to a Device Manager, the IP address for the Device Manager is
shown in the Unite Address text field under UNITE > Device Management.
Send Status Log
It is possible to send alarm and event reports to the Unite system. For example directly to the
ESS fault handler or to the UNA (Unite Node Assistant) which in turn forwards the alarm event
according to distribution lists.
1. Select UNITE > Status Log.
2. Enter the address to the server where the Status Log should be sent in the Unite IP
Address text field.
3. Enter the Resource Identity/Service in the Unite Resource Identity text field. If this field is
left empty then the default will be UNA (Unite Node Assistant).
Services
Configure Automatic Firmware Update
The IPBS/IPBL can be configured to automatically update its firmware. A script file must be
uploaded to a suitable directory on an internal web server. For information on the script file
syntax, see
Appendix A: How to Configure and Use the Update Server
1. Select Services > Update
2. Enter the URL of the script file in the URL text field.
3. Enter the poll interval, in minutes, in the Interval (min) text field
4. Click "OK".
The Current Update Serials section shows the values of the variables set after the last
execution of the associated command.
Configure Logging
There are three ways to collect logs, see the table below.
TCP
SYSLOG
HTTP
Avaya 374x DECT Telephones - User Guide
The syslog entries are transmitted using a TCP connection.
The entries are reported to a "syslogd" server in the network,
which is responsible for further evaluation or storage of the
entries.
The syslog entries are transferred to a web server where they can
be further processed. Each individual syslog entry is transmitted as
form data to the web server in HTTP GET format.
Operation
on page 153.
02/2016
113
Hide quick links:
Advertisement
Table of Contents
