Configure Ipbs/Ipbl As A Client In A New System - Avaya IPBS1 Installation And Operation Manual

5. In the Interval (min) text field, enter the update period.
6. Click "OK".
After the script is executed and each Radio is restarted, the Kerberos client will join the
Kerberos Server and it shall be possible to see all joined Kerberos clients in the bottom of the
Kerberos Server tab.
The way the update script is done in Appendix B: Update Script for Configuration of Kerberos
Clients it will automatically disable the local login possibilities if the joining was successful.
The password used in the script is now possible to change to a more secret password from the
Kerberos server page.
It shall now be possible login to the Radio using the Kerberos login credentials, see
using Kerberos

Configure IPBS/IPBL as a client in a new system

Precondition: The IPBS/IPBL must have software version 4.1.x or higher.
The idea is to use the Device Overview -> Add to configure the Radios and the Kerberos Client.
By using this feature it is not needed to browse into each Radio for configuration.
The Radios are in broadcast mode which means none of them are attached to the Master and
configured. If any of the Radios are attached to the master and configured, the Radios must be
detached from the Master if this procedure shall work.
1. Select Device Overview > Radios.
2. Click "Add" to add the Radio to the Master.
3. In the Add Radio window, enter a name for the device. You can also add a Standby Master
IP Address.
4. Go to the Kerberos section and enter the following in the text fields:
Realm: Enter the realm name of the Kerberos server.
Host name: Optional.
User: Enter the same user name defined in the Kerberos server.
Password: Enter the same password defined in the Kerberos server.
Disable local authentication: Select the Disable local authentication check box
(recommended).
Overwrite existing: Select the Overwrite existing check box (optional).
5. Go to the Authentication Servers section.
6. In the Realm/Domain text field, enter the realm name specified in the Kerberos server.
7. In the Address text field, enter the IP address of the Kerberos server. In the Kerberos
server enter 127.0.0.1 (localhost) as the IP address. The Port text field is filled out
automatically.
8. Click "OK".
76
Avaya 374x DECT Telephones - User Guide
on page 77.
Log in
02/2016