Db1 - Avaya IPBS1 Installation And Operation Manual

Software
The software in the BS3x0 can be updated by downloading new software without disconnecting
the equipment. The new software is stored in flash memory. See
and DB1 on page 132 for information.
Connectors
Two 8-pin RJ45 modular jacks for data and powering
l
A 6-pin RJ12 modular jack for factory testing
l
LEDs
Status of LED1 (lower LED)
Steady Green
Status of LED2 (upper LED)
Not lit
Flashing green
Steady green
Flashing amber
Steady amber

DB1

The following versions of the DB1 are available:
DB1 with internal antenna
l
DB1 with external antennas
l
The DB1 is backward compatible with the BS3x0 when it comes to coverage, functionality,
accessories and mounting bracket. If an old BS3x0 has to be replaced you just reuse the
mounting bracket and install the DB1.
Avaya 374x DECT Telephones - User Guide
Description
Power LED
Description
Base station operational and no traffic on the base
station.
Fully occupied with traffic.
Base station operational and traffic on the base
station.
Software is being downloaded to the base station
Base station is OK, but not available (self-test, not
initialized, no communication with IPBL)
System Downgrade for IPBS2
02/2016
Description
21