Multiple Radio Configuration; Pari; Sari - Avaya IPBS1 Installation And Operation Manual

Multiple Radio Configuration

The Master can configure the same Radio settings for all Radios in the system. All settings
configured in the Radio Config page replace the local Radio settings. This means that all
settings in the Radio Config menu will have precedence over values configured locally or
received via DHCP options.
1. Select DECT > Radio Config.
2. Configure alarm and event forwarding, see
3. Configure automatic firmware update, see
4. Configure NTP settings, see
5. Configure IP settings, see
6. Click "OK".
7. Click "OK".

PARI

The PARI is a part of the broadcast identity, which uniquely identifies an IPBS/IPBL. This PARI
is automatically assigned to each IPBS/IPBL in the system. But if more than one Avaya
IP-DECT system operates within the same coverage area, the systems need to have a unique
system identity in the PARI assigned in order to differentiate the systems.
To see the occupied system IDs of other Avaya IP-DECT systems within the coverage area,
perform an RFP scan, see
1. Select DECT > PARI.
2. Select a number between 1 and 292. If this is not done, the IPBS/IPBL will randomly select
a number.
Note: The number of system IDs will affect how many IPBSs/IPBLs that can be used per Master in an
installation, as shown below:
3. Click "OK".
4. Reset in order to make the changes take effect, see

SARI

The SARI is the broadcast identity, which uniquely identifies an IP-DECT system. The SARI is
added in the Master.
108
Avaya 374x DECT Telephones - User Guide
Trust List
Configure IP Settings
RFP Scan
System ID = 1 to 36:
Max. 1023 IPBS per Master or max. 240 IPBL per Master.
System ID = 37 to 292:
Max. 127 IPBS per Master or max. 127 IPBL per Master.
Forward Alarms and Events
Certificates
on page 84.
on page 95.
on page 140.
on page 115.
on page 84.
Reset on page 141.
02/2016