Db1 With External Antennas; Dip Switches - Avaya IPBS1 Installation And Operation Manual

Error
Fatal error

DIP Switches

The DIP switches can be found on the back of the DB1, see
Note: DIP switch 2, 3 and 4 shall be set to ON.
Set DIP switch 1 to ON or OFF as follows:
DIP switch 1: ON
DIP switch 1: OFF

DB1 with External Antennas

This section contains the differences between the DB1 with internal antenna and the DB1 with
external antennas. For all other information see
Contents of the Box
The box in which the DB1 is packed contains:
A DB1 with external antennas.
l
A mounting bracket
l
24
Avaya 374x DECT Telephones - User Guide
100 ms red, 100 ms off.
Solid red.
Back view while lying down
Figure 7. DB1 with MCX connectors for external antennas.
figure 6
IPBL mode, when the DB1 is to be
connected to an IPBL.
Integral mode, when the DB1 is to be
connected to an I5/I55 system.
DB1 with Internal Antenna
MCX connectors
U layer 1 communication
PN
error.
Fatal hardware error.
on page 22.
on page 22.
02/2016