Safety Information; Requirements - Siemens SINAMICS S120 Manual

Safety information

1.1

Requirements

The cabinet units described in this manual are used in industrial high-voltage installations.
During operation, this equipment contains rotating and live, bare parts. For this reason, it
could cause severe injury or significant material damage if the required covers are removed
without authorization, if the equipment is used or operated incorrectly, or if it has not been
properly maintained.
When the machines are used in non-industrial areas, the installation location must be
protected against unauthorized access (by protective fencing, for example) and appropriate
signs must be displayed.
The persons responsible for the safety of the plant are under an obligation to ensure that:
● The basic planning work for the plant and the transport, assembly, installation,
● All the documentation for the plant is always readily at hand.
● The technical data and specifications regarding the applicable installation, connection,
● The plant-specific assembly and safety guidelines are observed and personal protection
● No work whatsoever is carried out by unqualified personnel either on this equipment or in
These instructions are intended for qualified personnel and only contain information and
notes relating to the intended purpose of the machines.
The operating instructions and the machine documentation are available in the languages
specified in the supply contracts.
Note
We recommend engaging the support and services of your local Siemens service center for
all planning, installation, commissioning, and maintenance work.
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
DANGER
commissioning, maintenance, and repair work is carried out by qualified personnel and/or
checked by the experts responsible.
environmental, and operating conditions are always observed.
equipment is used.
its vicinity.
1
15