G33, Cbe20 Communication Board - Siemens SINAMICS S120 Manual

Options

8.5 G33, CBE20 Communication Board

8.5 G33, CBE20 Communication Board
Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Cabinet Kits
● Chassis format Motor Modules
Description
Figure 8-3
Interface module CBE20 is used for communication via PROFINET.
The module is delivered mounted in a supplementary pack on the CU320-2 Control Unit and
must be installed on the plant side in the option slot of the CU320-2 Control Unit.
4 Ethernet interfaces are available on the module. Diagnosis of the function mode and
communication are possible via LEDs.
334
CBE20 Ethernet Communication Board
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A